Development of equipment for testing and repairing diesel systems

CR-IP Test bench for testing injectors

new
View: 56

The CR-IP test bench is created for the testing and coding Common Rail injectors manufactured by Bosch, Delphi, Denso and Siemens at the system pressure up to 2400 bar. Measurement takes place in an electronic measurement system.

The software ARMD with test plans is included.

The CR-IP test bench allows you to simultaneously check 4 injectors, as well as monitor the temperature of the test fluid at each injector.

The CR-IP test bench uses a CR4-Tester device, which is designed to supply user-programmable Common Rail injector control signals to test their performance (shape and intensity of spray, volume performance).

The design of the CR-IP test bench and its equipment elements meets the requirements of international standards in terms of static and dynamic parameters — ISO 4008/1 and ISO 4008/2.

Software-hardware complex "ARM Diesel" allows you to:

  • create a configuration (sensors, actuators) of the pump test bench;
  • set the number of cycles;
  • set the speed of rotation of the motor;
  • control the value of temperature sensors, pressure, discrete (contact) sensors;
  • function of the electronic limb;
  • monitor the injection angle of the injection pump;
  • control devices diesel tester VE, PE;
  • adjust the temperature of the test fluid.

Specification Package


The frequency of the injection pulses of the opening injector
60 … 1500 min-1
Duration of injector opening pulse
100 … 3000 μs
Temperature control of the test fluid in the range
0 … 100 ± 1 °C
Test fluid pressure regulation in the range
0 … 2400 bar
Electronic pressure measurement in the fuel pressure accumulator in the range
0 … 2400 bar
Protective glass made of polycarbonate
10 mm
Dimensions
1100 x 1700 x 670


Universal cable BOSCH

1 pc.

Cable for Delphi injectors

1 pc.

Cable for BMW injectors

1 pc.

Cable for MB injectors

1 pc.

Cable for truck injectors       

1 pc.

Injector “neck”, nozzle diameter Ø 9 mm

1 set.

High pressure tubes М14хМ14х400мм

4 sets.

High pressure tube М14хМ14 for truck

1 pc.

Adapter from M14 to M12 mm for tube

4 pcs.

Injectors adapter set – Delphi&Denso of overflow fittings

1 set.

Kit of overflow fittings for Denso injectors

1 set.

The hose assembly BOSCH

1 pc

Tube PVC 6 mm

1 m

The tool SW8

1 pc

Split sleeves:                                        17.5 mm

4 pcs

19.5 mm

4 pcs

20.5 mm

1 pc

21.5 mm

1 pc

24.5 mm

1 pc

Bench legs

4 pcs.

Safety door key

5 pcs.

Enter your phone number and we will call you back